AQ-110FLV Arc fiber sensor unit with overcurrent

AQ-110FLV is a sophisticated microprocessor-based arc flash protection unit with combined current and arc sensing, which provides two (2) integrated trip criteria. It is designed to minimize the damage caused by an arcing fault (arc flash) by tripping the circuit breaker that sources the fault current. The complete system self-supervision function of AQ-110FLV provides the highest level of dependability by continuously monitoring all internal system functions as well as external connections.

Features:

  • A wide range for the power supply (18…72 V DC or 92…265 V AC/DC)
  • Three-phase current detection
  • A maximum of 3 fiber loop sensors
  • Connectivity to the AQ-2000 and AQ-1000 arc quenching systems
  • 1 high-speed output (HSO)
  • 1 high-speed semiconductor trip output (HST)
  • 4 trip relays
  • 1 system failure relay
  • 1 fast binary output
  • 2 fast binary inputs
  • 1 multifunction push button
  • Non-volatile memory
  • 18 indication LEDs


Ask for an offer
  • Overcurrent (50Arc)
  • Earth fault (50NArc)
  • Light (L>)
  • Light and pressure (L> / P>)
  • Circuit breaker failure protection (50BF/52BF)
  • Trip time when using mechanical trip relays: 7 ms*
  • Reset time (arc light stage): 2 ms
  • Protection operational after power up: 88 ms
  • *) total trip time when using arc light (L>) or when using arc light (L>) and phase/earth overcurrent (I>) from an AQ-110x unit
  • Applicable sensors/h5>
  • AQ-06 plastic fiber sensor (3...40 m) (optional)
  • AQ-07 glass fiber sensor (3-50 m length) (optional)
  • AQ-08 glass fiber sensor (3...15 m) (optional)
  • Trip relays (T1, T2, T3, T4)
  • 3 NO + 1 NC or 4 NO
  • Rated voltage: 250 V AC/DC
  • Continuous carry: 5 A
  • Make-and-carry for 3 s: 16 A
  • Make-and-carry for 0.5 s: 30 A
  • Breaking capacity DC (when L/R = 40 ms): 40 W; 0.36 A at 110 V DC
  • Contact material: AgNi 90/10
  • Binary output (BO1)
  • Number of outputs: 1
  • Rated voltage: +24 V DC
  • Maximum rated current: 20 mA
  • Binary inputs (BI1, BI2)
  • Number of inputs: 2
  • Threshold voltage: 24 V DC
  • Rated voltage: 250 V
  • Rated current: 3 mA
  • Power supply
  • Auxiliary power supply: 92…265 V AC/DC
  • Auxiliary power supply: 18…72 V DC (optional)
  • Maximum interruption: 100 ms
  • Maximum power consumption: 5 W
  • Standby current: 90 mA
  • 18 indication LEDs
  • Multifunction push button (SET)
  • Autoconfiguration
  • Indication reset
  • System check
  • Sensors and wiring
  • Binary I/O
  • Trip coil
  • Power supply
  • Internal voltages
  • Settings
  • CT connections
  • AQ-1000 Quenching device
  • AQ-2000 Quenching device
  • AQ-100 series
  • AQ-200 series
  • AQ-300 series
  • AX006 Wall mounting bracket

Create PDF